2024-04-20 07:56:23 - Not logged in - de

Connector - ATA Internal

ATA=AT bus Attachment..
Developed by Western Digital, Conner & Seagate ?.

40 PIN IDC MALE at the controller & peripherals.
40 PIN IDC FEMALE at the cable.

	(at the cable)
	(at the controller & peripherals)

Pin	Name	Direction	Description
1	/RESET	Output	Reset
2	GND	---	Ground
3	DD7	---	Data 7
4	DD8	---	Data 8
5	DD6	---	Data 6
6	DD9	---	Data 9
7	DD5	---	Data 5
8	DD10	---	Data 10
9	DD4	---	Data 4
10	DD11	---	Data 11
11	DD3	---	Data 3
12	DD12	---	Data 12
13	DD2	---	Data 2
14	DD13	---	Data 13
15	DD1	---	Data 1
16	DD14	---	Data 14
17	DD0	---	Data 0
18	DD15	---	Data 15
19	GND	---	Ground
20	KEY	---	Key (Pin missing)
21	DMARQ		DMA Request
22	GND	---	Ground
23	/DIOW	Output	Write Strobe
24	GND	---	Ground
25	/DIOR	Output	Read Strobe
26	GND	---	Ground
27	IORDY	Input	I/O Ready
28	SPSYNC:CSEL		Spindle Sync or Cable Select
29	/DMACK		DMA Acknowledge
30	GND	---	Ground
31	INTRQ	Input	Interrupt Request
32	/IOCS16		IO ChipSelect 16
33	DA1	Output	Address 1
34	PDIAG		Passed Diagnostics
35	DA0	Output	Address 0
36	DA2	Output	Address 2
37	/IDE_CS0	Output	(1F0-1F7)
38	/IDE_CS1	Output	(3F6-3F7)
39	/ACTIVE	Output	Led driver
40	GND	---	Ground

Note: Direction is Controller relative Devices (Harddisks).

Source: HW-Book 2001-06-08
Last modified: 2007-06-27 14:22:59.0
Aus rechtlichen Gründen kann ich leider keinelei Garantie für die Angaben übernehmen.

Counter: 6079960

Version 2.6.0.0
2016-04-26 22:00:00

0.1s

File last modified 2024-02-15 23:07:43